Removing the keyboard-controller board
About this task
The following image(s) indicate the location of the keyboard-controller board and provides a visual representation of the removal procedure.
![Image: Removing the keyboard-controller board](https://dl.dell.com/content/guides/public/Html/alienware-m17-ryzen-edition-r5-service-manual/images/GUID-39F3CC67-2F35-44E6-AABF-C23135CACC88-low.jpg)
Steps
- Peel the Mylar on the keyboard-controller board.
- Open the latch and disconnect the keyboard cable from the keyboard-controller board.
- Open the latch and disconnect the keyboard-backlight cable from the keyboard-controller board.
- Open the latch and disconnect the keyboard-controller board cable from the system board.
- Remove the screw (M2x2) that secures the keyboard-controller board to the palm-rest and keyboard assembly.
- Lift the keyboard-controller board off the palm-rest and keyboard assembly.
- Open the latch and disconnect the keyboard-controller board cable from the keyboard-controller board.
Data is not available for the Topic