Removing the power-adapter port
About this task
The following image(s) indicate the location of the power-adapter port and provides a visual representation of the removal procedure.
![Removing the power-adapter port](https://dl.dell.com/content/guides/public/Html/alienware-m17-ryzen-edition-r5-service-manual/images/GUID-C8C4194F-BBE9-4EE8-BDD4-1C5082563EFE-low.jpg)
Steps
- Peel the tape that secures the display-cable connector latch to the system board.
- Open the latch and disconnect the display cable from the system board.
- Disconnect the Alien head LED-cable from the system board.
- Peel the display cable off the system board and remove the display cable from the slot on the palm-rest and keyboard assembly.
- Lift the Mylar that covers the system board.
- Disconnect the power-adapter port-cable from the system board.
- Peel the power-adapter port-cable from the system board.
- Remove the two screws (M2x4) that secure the power-adapter port-bracket to the palm-rest and keyboard assembly.
- Lift the power-adapter port bracket off the palm-rest and keyboard assembly.
Data is not available for the Topic