Installing the memory module
Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
NOTE:Up to two memory modules may be installed into this computer.
The following image(s) indicate the location of the memory module and provides a visual representation of the installation procedure.
Steps
- Align the notch on the memory module with the tab on the memory-module slot.
- Slide the memory module firmly at an angle, into the memory-module slot.
- Press the memory module down until it clicks into place.
CAUTION:To prevent damage to the memory module, hold the memory module by the edges. Do not touch the components on the memory module.
NOTE:Repeat the steps to install any other memory module into your computer.
NOTE:The securing clips return to a locked position. If you do not hear the click, remove the memory module and reinstall it.
Data is not available for the Topic