Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Alienware m17 R5 AMD Service Manual

PDF

Installing the ethernet and audio board

Prerequisites

If you are replacing a component, remove the existing component before performing the installation process.

About this task

The following image(s) indicate the location of the ethernet and audio board and provides a visual representation of the installation procedure.

Image: Installing the audio daughter-board

Steps

  1. Connect the ethernet and audio board to the system-board assembly.
  2. Align the screw holes on the ethernet and audio board with the screw holes on the system-board assembly.
  3. Replace the two screws (M2x4) that secure the ethernet and audio board to the system-board assembly.
  4. Turn the system-board assembly over.

Next steps

  1. Follow the procedure from step 6 to step 25 in Installing the system board.
  2. Install the rear-I/O cover.
  3. Install the wireless card.
  4. Install the M.2 2230 solid-state drive or M.2 2280 solid-state drive in slot one, whichever applicable.
  5. Install the M.2 2230 solid-state drive or M.2 2280 solid-state drive in slot two, whichever applicable.
  6. Install the memory module.
  7. Install the base cover.
  8. Follow the procedure in After working inside your computer.
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\