Removing the display assembly
About this task
The following image(s) indicate the location of the display assembly and provides a visual representation of the removal procedure.
Steps
- Disconnect the camera cable from the system board.
- Peel the tapes securing the camera cable to the system board.
- Remove the camera cable through the routing on the fan and palm-rest and keyboard-assembly.
- Peel the tape that secures the display-cable connector latch to the system board.
- Open the latch and disconnect the display cable from the system board.
- Disconnect the Alien head LED-cable from the system board.
- Turn the computer over.
- Peel the display cable off the system board and remove the display cable from the slot on the palm-rest and keyboard assembly.
- Remove the display cable and Alien head LED-cable from the routing guides on the display assembly.
- Remove the camera cable from the routing guides on the display assembly.
- Remove the six screws (M2.5x5) that secure the display assembly to the palm-rest and keyboard assembly.
- Lift the display assembly off the palm-rest and keyboard assembly.
Data is not available for the Topic