Alienware m16 R1 AMD Service Manual

Screw list

NOTE:When removing screws from a component, it is recommended to note the screw type and the quantity of screws, and then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is restored when the component is replaced.

NOTE:Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surfaces when replacing a component.

NOTE:Screw color may vary depending on the configuration ordered.

Table 1. Screw listScrew list
Component	Screw type	Quantity	Screw image
Base cover	M2.5x8 (captive screw)	2
Base cover	M2.5x5	6
2280 or 2230 solid-state drive in SSD Slot one and two	M2x3.5	2
2230 solid-state drive in SSD Slot three	M2x3.5	2
Wireless-card bracket	M2x2.5	2
Small fan	M2x4	3
Rear I/O cover	M2x4	5
Rear I/O cover	M2.5x5	2
I/O board	M2x2.5	4
Battery	M2x3.5	4
Battery	M2x4	4
Power-adapter port-bracket	M2x4	2
Display-assembly hinges	M2.5x5	10
Touchpad bracket	M2x2.5	6
Touchpad	M2x2	2
Antenna	M2.5x5	4
Keyboard-controller board	M2x2	2
Type-C bracket	M2x2.5	2
System board	M2x4	18
System board	M2x2.5	2
Fan and heat-sink assembly	M2x8.05 (captive)	4
Fan and heat-sink assembly	M2x7.1 (captive)	4
Audio board	M2x4	2
Power button bracket	M2x2.5	3