Alienware m15 R7 Service Manual

Screw list

NOTE: When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is restored when the component is replaced.

NOTE: Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surfaces when replacing a component.

NOTE: Screw color may vary with the configuration ordered.

Table 1. Screw listScrew list
Component	Screw type	Quantity	Screw image
Base cover	M2.5x14 (captive screw)	4
Base cover	M2.5x5	4
2230 or 2280 solid-state drive in SSD Slot one	M2x4	2
2230 or 2280 solid-state drive in SSD Slot two	M2x4	2
Wireless-card bracket	M2x4	1
Rear I/O cover	M2x2	3
Rear I/O cover	M2.5x5	2
Battery	M2x4	4
Battery	M2x3	1
Power-adapter port-bracket	M2x4	2
Display-assembly hinges	M2.5x5	6
Touchpad bracket	M2.5x2.5	2
Touchpad	M2x2	2
Keyboard-controller board	M2x2	1
Type-C bracket	M2x4	2
System board	M2x4	7
System board	M2x2	2
Fan and heat-sink assembly	M2x4 (captive)	6
Left-I/O board	M2x4	2
Right-I/O board	M2x4	3
Rear I/O cover	M2x4	2
Rear I/O cover	M2.5x5	2
Power button	M2x2	3