Removing the 2230 solid-state drive in slot one
About this task
NOTE: This procedure applies only to computers shipped with an 2230 solid-state drive installed in M.2 slot one (SSD1).
NOTE: The M.2 card installed on M.2 slot one (SSD1) will depend on the configuration ordered. Supported card configurations:
- 2230 solid-state drive
- 2280 solid-state drive
The following image(s) indicate the location of the 2230 solid-state drive in slot one and provides a visual representation of the removal procedure.
Steps
- Remove the two screws (M2x4) that secure the 2230 thermal shield to the palm-rest and keyboard assembly.
- Slide and remove the 2230 thermal shield off the solid-state drive.
- Slide and remove the 2230 solid-state drive from the solid-state drive slot.
Data is not available for the Topic