Installing the memory
Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
NOTE: Up to two memory modules may be installed into this computer.
The following image(s) indicate the location of the memory and provides a visual representation of the installation procedure.
![Installing the memory](https://dl.dell.com/content/guides/public/Html/alienware-m15-r7-service-manual/images/GUID-4222FB9F-2CF3-4B31-8ABA-6AEB4863B5EC-low.jpg)
Steps
- Align the notch on the memory module with the tab on the memory-module slot.
- Slide the memory module firmly at an angle, into the memory-module slot.
- Press the memory module down until it clicks into place.
CAUTION: To prevent damage to the memory module, hold the memory module by the edges. Do not touch the components on the memory module.
NOTE: Repeat the steps to install a second memory into your computer.
NOTE: The securing clips return to a locked position. If you do not hear the click, remove the memory module and
reinstall it.
Data is not available for the Topic