Installing the battery
Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
The following image(s) indicate the location of the battery and provides a visual representation of the installation procedure.
![Installing the battery](https://dl.dell.com/content/guides/public/Html/alienware-m15-r7-service-manual/images/GUID-9F2C0749-9978-4208-9E5E-F83A31CE1A6B-low.jpg)
Steps
- Using the alignment posts, place the battery on the palm-rest and keyboard assembly.
- Align the screw holes on the battery with the screw holes on the palm-rest and keyboard assembly.
- Replace the four screws (M2x4) that secure the battery to the palm-rest and keyboard assembly.
- Replace the screw (M2x3) that secure the battery to the palm-rest and keyboard assembly.
- Connect the battery cable to the system board.
- Adhere the tape that secures the battery cable to the battery.
Data is not available for the Topic