Removing the power-adapter port
About this task
The following image indicates the location of the power-adapter port and provides a visual representation of the removal procedure.
Steps
- Open the latch and disconnect the display cable from the system board.
- Disconnect the Alienhead LED cable from the system board.
- Peel the display cable from the system board and remove the display cable from the slot on the system board.
- Lift the system board Mylar next to the left fan to access the power-adapter port.
- Remove the two screws (M2x4) on the power-adapter port-bracket that secures the power-adapter port bracket to the system board.
- Lift the power-adapter port-bracket off the system board.
- Disconnect the power-adapter port-cable from the system board.
- Peel and lift the power-adapter port, along with its cable, off the system board.
Data is not available for the Topic