|
Integrated NIC
|
Enables or disables the Integrated NIC.
Default: Enabled
|
|
USB Emulation
|
Enables or disables the USB emulation feature. This feature defines how the BIOS, in the absence of a USB-aware operating system, handles USB devices. USB emulation is always enabled during POST.
NOTE You cannot boot any type of USB device (floppy, hard drive, or memory key) when this option is off.
Default: Enabled
|
|
USB PowerShare
|
Enables or disables USB PowerShare.
Default: Enabled
|
|
USB Wake Support
|
Enables or disables the USB Wake Support.
Default: Enabled
|
|
SATA Operation
|
Allows you to configure the operating mode of the integrated SATA hard drive controller.
Default: AHCI
|
|
Adapter Warnings
|
Allows you to choose if the computer should display warning messages when you use AC adapters that are not supported by your computer.
Default: Enabled
|
|
Function Key Behavior
|
Allows you to set function key or multimedia key as the default function key behavior.
Default: Multimedia key
|
|
Keyboard Backlight with AC
|
Selects the timeout value for the keyboard backlight when an AC adapter is plugged into the computer.
Default: 1 minute
|
|
Keyboard Backlight with Battery
|
Selects the timeout value for the keyboard backlight when the computer is running on battery power.
Default: 1 minute
|
|
Battery Health
|
Displays the battery health.
|
|
Battery Charge Configuration
|
Set the battery charge settings with a preselected custom charge start and stop.
Default: Adaptive
|
|
Advance Battery Charge Configuration
|
Set the battery charge settings with a preselected custom charge start and stop.
Default: Adaptive
|
|
Power on LID open
|
Selects the power-on option when the display is open.
Default: Disabled
|
|
Maintenance
|
|
|
Data Wipe on next boot
|
Enables or disables data wipe on the next boot.
Default: Disabled
|
|
BIOS Recovery from Hard Drive
|
Enables the user to recover from certain corrupted BIOS conditions from a recovery file on the user primary hard drive or an external USB key.
|
|
BIOS Auto-Recovery
|
Enables BIOS to automatically recover BIOS without user actions.
Default: Disabled
|
|
SupportAssist System Resolution
|
|
|
Auto OS Recovery Threshold
|
Controls the automatic boot flow for SupportAssist System Resolution Console and for the Dell operating system Recovery tool.
Default: 2
|
|
SupportAssist OS Recovery
|
Enables or disables the boot flow for the SupportAssist OS Recovery tool in the even of certain system errors.
Default: Disabled
|
|
Enable Hybrid Graphics / Advanced Optimus (when available)
|
When turned on, the system allows both integrated and discrete graphics controllers to work together for optimized capability and battery life. When turned off, the discrete graphics controller will drive all displays to prioritize graphics capability over battery life.
Default: ON
NOTE Linux is not supported with Hybrid Graphics enabled.
NOTE This option is available for the computer that features the following discrete GPUs:
- NVIDIA GeForce RTX 3060
- NVIDIA GeForce RTX 3070
- NVIDIA GeForce RTX 3080
|
|
CPU TCC offset
|
Controls the maximum CPU temperature of the computer, the input value ranges from zero to 15.
Default: 0
|