Installing the speakers
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the speakers and provides a visual representation of the installation procedure.
![Image: Installing the speakers (AMD)](https://dl.dell.com/content/guides/public/Html/alienware-m15-ryzen-edition-r5-service-manual/images/GUID-E4E1FA5A-DE3B-4280-9A2C-B42A4BEFABBE-low.jpg)
Steps
- Using the alignment posts and rubber grommets, place the speakers in the slots on the palm-rest and keyboard assembly.
NOTE If the rubber grommets are pushed out of the speakers when removing the speakers, push them back in place before replacing the speakers.
- Route the speaker cable through the routing guides on the palm-rest and keyboard assembly.
- Adhere the tapes that secure the speaker cable to the palm-rest and keyboard assembly.
- Connect the speaker cable to the system board.
Data is not available for the Topic