Installing the wireless card
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the wireless card and provides a visual representation of the installation procedure.
Steps
- Lift the system board Mylar to access the wireless-card slot.
- Connect the antenna cables to the wireless card.
The following table provides the antenna-cable color scheme for the wireless card that is supported by your computer.
Table 1. Antenna-cable color schemeThe following table provides the antenna-cable color scheme for the wireless card of your computer.
Connectors on the wireless card
| Antenna-cable color
| Silkscreen marking
|
---|
Main
| White
| MAIN
| △ (white triangle)
|
Auxiliary
| Black
| AUX
| ▲ (black triangle)
|
- Align the notch on the wireless card with the tab on the wireless-card slot and insert the wireless card at an angle into the wireless-card slot.
- Align and place the wireless-card bracket on the wireless card.
- Replace the screw (M2x4) that secures the wireless-card bracket to the system board and palm-rest and keyboard assembly.
- Secure the wireless-card cables to the palm-rest and keyboard assembly with the keyboard Mylar.
Data is not available for the Topic