Installing the rear I/O-cover
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the rear I/O-cover and provides a visual representation of the installation procedure.
![Image: Installing the rear I/O-cover](https://dl.dell.com/content/guides/public/Html/alienware-m15-ryzen-edition-r5-service-manual/images/GUID-E6C7413A-EB1F-4759-8EB4-6341665CE299-low.jpg)
Steps
- Slide the rear I/O-cover onto the palm-rest and keyboard assembly until it snaps into place.
- Replace the two screws (M2x4) that secure the rear I/O-cover to the palm-rest and keyboard assembly.
- Connect the Tron light cable to the system board.
- Replace the two screws (M2.5x5) that secure the rear I/O-cover to the palm-rest and keyboard assembly.
Data is not available for the Topic