If you are replacing a component, remove the existing component before performing the installation procedure.
WARNING: : The
cables and ports on the back of the
power-supply unit are color-coded to indicate the different power wattage.
Ensure that you plug in the cable to the correct port. Failure to do so
may result in damaging the power-supply unit and/or system
components.
About this task
The following images indicate the location of the power-supply unit and provides a visual representation of the installation procedure.
Steps
Place the power supply on the chassis.
Align the screw holes on the power-supply unit with the screw holes on the chassis.
Replace the four screws (#6-32) that secure the power-supply unit to the chassis.
Connect all the power cables to the power-supply unit.
Align the screw holes on the power-supply unit bracket with the screw holes on the power-supply unit cage.
Replace the two screws (#6-32) that secure the power-supply unit bracket to the power-supply unit cage.