Removing the 3.5-inch hard drive
About this task
The following images indicate the location of the 3.5-inch hard drive and provides a visual representation of the removal procedure.
![Image: Removing the 3.5-inch hard drive](https://dl.dell.com/topics//alienware-aurora-r9-service-manual/images/GUID-E9DBE8BF-B10A-4C06-B3E2-66A95D2B213B-low.jpg)
Steps
- Disconnect the data and power cables from the hard drive.
- Press the release tabs on the hard-drive carrier and slide the hard-drive carrier out of the hard-drive cage.
- Pry the hard-drive carrier to release the tabs on the carrier from the slots on the hard drive.
- Lift the hard drive out of the hard-drive assembly.
NOTE: : Note the orientation of the hard drive so that you can replace it correctly.
Data is not available for the Topic