Installing the antennas
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following images indicate the location of the antennas and provides a visual representation of the installation procedure.
![Image: Installing the antennas](https://dl.dell.com/content/guides/public/Html/alienware-aurora-ryzen-service-manual/images/GUID-D3F747DD-6C1F-40BE-A20F-F130413ED56F-low.jpg)
Steps
- Adhere the antenna to the chassis.
- Replace the four screws (M3x4t) that secures the antennas to the chassis.
- Route the antenna cables through the routing guides on the top bezel.
Data is not available for the Topic