Installing the wireless card
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
CAUTION: To avoid damage to the wireless mini-card, do not place any cables
under it.
About this task
The following images indicate the location of the wireless card and provides a visual representation of the installation procedure.
![Image: Installing the wireless card](https://dl.dell.com/content/guides/public/Html/alienware-aurora-ryzen-service-manual/images/GUID-1A5C6915-ABC3-4282-8FBE-6F54B2919687-low.jpg)
Steps
- Connect the antenna cables to the wireless
card.
The following table provides the antenna-cable color
scheme for the wireless card supported by your computer.
Table 1. Antenna-cable
color schemeThe table provides the antenna-cable color scheme
for the wireless card supported by your computer.Connectors on the wireless card | Antenna-cable color |
---|
Main (white triangle) | White |
Auxiliary (black triangle) | Black |
- Place the wireless-card bracket on the wireless
card.
- Align the notch on the wireless card with the
tab on the wireless-card slot.
- Slide the wireless card at an angle into the
wireless-card slot.
- Replace the screw (M2x4) that secures the wireless
card to the system board.
Data is not available for the Topic