Installing the top bezel
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following images indicate the location of the top bezel and provides a visual representation of the installation procedure.
![Image: Installing the top bezel](https://dl.dell.com/content/guides/public/Html/alienware-aurora-ryzen-service-manual/images/GUID-AFAF6E54-43F6-4F8B-BF69-3193D8D10C6D-low.jpg)
Steps
- Route the antenna cable through the slots on the chassis.
- Align the tabs on the top cover with the slots on the chassis and snap the top cover into place.
- Replace the four screws (#6-32) that secure the top bezel to the right and left of the chassis.
Data is not available for the Topic