Installing the left-side cover
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following images indicate the location of the left-side cover and provides a visual representation of the installation procedure.
![Image: Installing the left-side cover](https://dl.dell.com/content/guides/public/Html/alienware-aurora-ryzen-service-manual/images/GUID-A3CE35DB-CB1E-4F38-AEBF-4BB7888C01DB-low.jpg)
Steps
- Locate the tabs on the left-side cover and slots on the chassis.
- Rotate the left-side cover towards the chassis until it snaps into place.
- Replace the screw (M3x4) that secures the side-cover release latch to the chassis.
Data is not available for the Topic