Installing the front I/O-panel
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following images indicate the location of the front I/O-panel and provides a visual representation of the installation procedure.
![Image: Installing the front I/O-panel](https://dl.dell.com/content/guides/public/Html/alienware-aurora-ryzen-service-manual/images/GUID-8EDE7194-173A-4004-895A-01F76B313CD6-low.jpg)
Steps
- Align the screw holes on the front I/O-panel with the screw holes on the front bezel and snap it into place.
- Replace the four screws (M3x4) that secures the front I/O-panel to the front bezel.
Data is not available for the Topic