Installing the 3.5-inch hard-drive cage
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following images indicate the location of the 3.5-inch hard-drive cage and provides a visual representation of the installation procedure.
![Image: Installing the 3.5-inch hard-drive cage](https://dl.dell.com/content/guides/public/Html/alienware-aurora-ryzen-service-manual/images/GUID-56DE3221-1D64-41C5-9F51-CB9523358541-low.jpg)
Steps
- Insert the 3.5-inch hard-drive cage into its slot on the chassis.
- Align the tabs on the cage with the tabs on the chassis.
- Replace the two screws (#6-32) that secure the 3.5-inch hard-drive cage to the
chassis.
Data is not available for the Topic