Removing the 2.5-inch hard drive
About this task
The following images indicate the location of the 2.5-inch hard drive and provides a visual representation of the removal procedure.
Steps
- Disconnect the data and power cables from
the hard drive.
- Press the release tabs on the hard-drive carrier
and slide the hard-drive assembly out of the hard-drive cage.
- Pry the hard-drive carrier to release the tabs
on the assembly from the slots on the hard drive.
- Lift the hard drive out of the hard-drive assembly.
NOTE: Note the orientation of the hard drive so that you can replace it
correctly.
NOTE: Repeat the steps to remove any additional 2.5-inch hard drive from your computer.
Data is not available for the Topic