Configure eBGP peer route
You can configure eBGP peer routes for a network.
Create eBGP route
- Click
Network >
Routing Configuration.
- Select
eBGP Peer Configuration.
- Click
Create.
- Enter the following details:
- Policy name
- Peer interface IP address
- Peer ASN
- (Optional) Description
- BFD configuration
- Select the
Fabric Interconnect checkbox, if you are creating the uplink for multisite fabric interconnect purpose. See
Multisite fabric interconnect.
- Click
Create. The system displays eBGP peer route creation is successful.
The eBGP peer details display a list of mapped routes. Select an eBGP route to view details pertaining to that specific route including the switch ID.
Delete eBGP route
- Select the eBGP route policy to delete and click
Delete.
- Click
Delete to confirm. The system displays route policy deletion success message.
Add eBGP route to switch
- Select an eBGP route policy from the list.
- Click
Add Route to Switch.
- Select the switch to which you want to add the route.
- Click
Add. The system displays the route to switch addition success message.
Delete eBGP route from switch
- Select an eBGP route, then click
Delete Route.
- Click
Delete to remove the route from the switch. The system displays route deletion success message.