CAUTION: Many repairs may only
be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation,
or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered
by your warranty. Read and follow the safety instructions that are
shipped with your product.
Steps
Enter the System Setup and ensure that the Internal SD Card Port is enabled.
Note the Internal SD Card Redundancy option enabled in the Integrated Devices screen
of the System Setup (Mirror or Disabled).
Remove the server module from the enclosure.
If the Internal SD Card Redundancy option in the Integrated Devices screen of
the System Setup is set to Mirror mode and SD card 1 has failed:
Remove the SD card from SD card slot 1.
Remove the SD card present in SD card slot
2 and insert it into SD card slot 1.
Install a new SD card in slot 2.
If the Internal SD Card Redundancy option in the Integrated Devices screen of
the System Setup is set to Mirror mode and SD card 2 has failed, insert the new SD card into SD card
slot 2.
If the Internal SD Card Redundancy option in Integrated Devices screen of the
System Setup is set to Disabled,
replace the failed SD card with a new SD card.
Install the server module in the enclosure.
Enter the System Setup and ensure that the Internal SD Card Port option is enabled and Internal SD Card Redundancy option is set to Mirror mode.
Check if the SD card is functioning properly.
If the problem persists, see the Getting help section.
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\