Secure connect gateway collects telemetry at periodic intervals and when a service request is created. The
Telemetry settings page allows you to enable or disable
secure connect gateway to collect telemetry, upload telemetry, and include or exclude identity information in the collected telemetry.
It also enables you to configure a Common Internet File System (CIFS) location in which application logs from MX7000 devices are stored before they are bundled with other collected telemetry.
In the
Data collection settings section, select or clear the types of telemetry
secure connect gateway can collect from your devices.
In the
Customer & device data privacy section, by default, the option to include identification information is selected. But, if you do not want to include the information, clear the check box.
When the checkbox is cleared, the hostname and IP address in your SMTP mails are masked for privacy.
NOTE:If you clear the check box, the collection of logs and diagnostic data are automatically disabled. Also, some of the data about your company network including the system log is not sent to the backend. This may prevent technical support from resolving issues that may occur on your devices.
In the
Dell triggered collections section, by default, the option to allow a technical support agent to remotely initiate a collection on PowerEdge servers and PowerSwitch switches is selected. But, if you do not want to allow such a collection, clear the check box.
In the
Upload section, by default, the option to allow
secure connect gateway to automatically send the information that is collected to the Dell backend is selected. But, if you want to manually send the collections to the backend, clear the check box.
Click
Apply.
To configure CIFS location, perform the following steps in the
PowerEdge MX7000 Chassis section:
Secure connect gateway supports IPV4 for PowerEdge MX7000 Chassis.
Enter the file share path or location.
Enter the username and password that is required to access the location.
Click
Apply.
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\