When you expand your system, you must ensure that there are network IP addresses available for communication.
About this task
The IP address ranges cannot overlap and must be used exclusively for the static network defined. For example, you cannot create an IP address range of 10.10.10.1–10.10.10.100 and another range of 10.10.10.50–10.10.10.150.
Node type
IP address requirements
PowerFlex hyperconverged node
One VMware ESXI management IP address
One vMotion IP address
Two IP addressees per data network
One
PowerFlex management IP address
PowerFlex storage-only node
One IP address per data network
One
PowerFlex management IP address
PowerFlex compute-only node
One ESXi management IP address
One vMotion IP address
One IP address per data network
One
PowerFlex management IP address
Steps
Go to
Settings > Networks.
Select the network on which you want to ensure that there are available IP addresses.
Scroll to the
Static IP Address Details field, and select
Available IP Addresses from the
View drop-down list.
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\