Skip to main content

Latitude 5350/Latitude 5350 2-in-1 Owner's Manual

PDF

Screw list

NOTE:When removing screws from a component, it is recommended to note the screw type, and the quantity of screws, and then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is restored when the component is replaced.

NOTE:Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surfaces when replacing a component.

NOTE:Screw color may vary with the configuration ordered.

Table 1. Screw listThe following table provides the different screws that are used in your Latitude 5350/Latitude 5350 2-in-1.
Component	Screw type	Quantity	Screw image
Base cover	M2.5x6 (captive screw)	8
Battery	M2x4.5, OD4.6, T0.8 (captive screw)	5
M.2 2230 SSD	M2x2.5	2
4G WWAN bracket	M2x3.5	1
5G WWAN bracket	M2x3.5	1
5G WWAN thermal shield	M2x3	2
Fan	M2x3	3
Fingerprint-reader bracket	M2x3	1
eDP bracket	M2x4	1
USB Type-C bracket	M2x5	3
System board	M2x4	1
System board	M2x3	4
Power button	M2x2	1
Power button with fingerprint reader	M2x2	1
Keyboard bracket	M2x2	18
Keyboard	M2x2	2
Left hinge (display hinge to system board)	M2.5x4	2
Right hinge (display hinge to system board)	M2.5x4	2
Left hinge (display hinge to display back cover)	M2.5x3	3
Right hinge (display hinge to display back cover)	M2.5x3	3
Display panel	M2x2.5	2
Smart card reader	M2x2	2