Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products

Dell Latitude 5300 Setup and specifications guide

Updating your system BIOS using a USB flash drive

If the system cannot load into Windows, but there is still a need to update the BIOS, download the BIOS file using another system and save it to a bootable USB Flash Drive.
NOTE You will need to use a bootable USB flash drive. Please refer to the following article for further details How to Create a Bootable USB Flash Drive using Dell Diagnostic Deployment Package (DDDP)
  1. Download the BIOS update .EXE file to another system.
  2. Copy the file e.g. O9010A12.EXE onto the bootable USB flash drive.
  3. Insert the USB flash drive into the system that requires the BIOS update.
  4. Restart the system and press F12 when the Dell splash logo appears to display the One Time Boot Menu.
  5. Using arrow keys, select USB Storage Device and click Enter.
  6. The system will boot to a Diag C:\> prompt.
  7. Run the file by typing the full filename, for example, O9010A12.exe and press Enter.
  8. The BIOS Update Utility will load. Follow the instructions on screen.
    Figure 1. DOS BIOS Update Screen
    Displays the DOS Bios update screen

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\