Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products

Alienware x15 R2 Setup and Specifications

Display

The following table lists the display specifications of your Alienware x15 R2.

Table 1. Display specifications

The following table provides the detailed display specifications of Alienware x15 R2.

Description Option one Option two Option three
Display type

Full High Definition (FHD)

Full High Definition (FHD)

Quad High Definition (QHD)

Display-panel technology

Wide Viewing Angle (WVA)

Wide Viewing Angle (WVA)

Wide Viewing Angle (WVA)

Display-panel dimensions (active area):
Height

193.59 mm (7.62 in.)

193.59 mm (7.62 in.)

193.62 mm (7.62 in.)

Width

344.16 mm (13.55 in.)

344.16 mm (13.55 in.)

344.21 mm (13.55 in.)

Diagonal

394.87 mm (15.55 in.)

394.87 mm (15.55 in.)

394.93 mm (15.55 in.)

Display-panel native resolution

1920 x 1080

1920 x 1080

2560 x 1440

Luminance (typical)

300 nits

300 nits

400 nits

Megapixels

2.07

2.07

3.69

Color gamut

sRGB 100%

sRGB 100%

DCI P3 99%

Pixels Per Inch (PPI)

141

141

188.30

Contrast ratio (typ)

1000:1

1000:1

1000:1

Response time (max)

19 ms

10 ms

19 ms

Refresh rate

165 Hz

360 Hz

240 Hz

Horizontal view angle

+/- 85 degrees

+/- 85 degrees

+/- 85 degrees

Vertical view angle

+/- 85 degrees

+/- 85 degrees

+/- 85 degrees

Pixel pitch

0.18 mm

0.18 mm

0.13 mm

Power consumption (maximum)

6 W

7.60 W

8.55 W

Anti-glare vs glossy finish

Anti-glare

Anti-glare

Anti-glare

Touch options

No

No

No

Adaptive sync support None. G-SYNC, Advanced Optimus G-SYNC, Advanced Optimus G-SYNC, Advanced Optimus

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\