Caption
|
The Caption property is a short textual description (one-
line string) of the object.
|
CreationClassName
|
Indicates the name of the class or the subclass used in
the creation of an instance. When used with the other key properties
of this class, this property allows all instances of this class and
its subclasses to be uniquely identified.
|
CurrentBitsPerPixel
|
The number of bits used to display each pixel.
|
CurrentHorizontalResolution
|
Current number of horizontal pixels.
|
CurrentNumberOfColumns
|
If in character mode, number of columns for this DisplayController.
Otherwise, enter 0.
|
CurrentNumberOfRows
|
If in character mode, number of rows for this Video Controller.
Otherwise, enter 0.
|
CurrentScanMode
|
Current scan mode.
Possible values are:
- 0 = Unknown
- 1 = Other
- 2 = Not Supported
- 3 = Non-Interlaced Operation
- 4 = Interlaced Operation
|
CurrentVerticalResolution
|
Current number of vertical pixels.
|
Description
|
Provides a textual description of the object.
|
DeviceID
|
An address or other identifying information used to uniquely
name the LogicalDevice.
|
ElementName
|
A user-friendly name for the object. This property allows
each instance to define a user-friendly name in addition to its key
properties, identity data, and description information.
-
NOTE: The Name property of ManagedSystemElement
is also defined as a user-friendly name. But, it is often subclassed
to be a Key. It is not reasonable that the same property can convey
both identity and a user-friendly name, without inconsistencies. Where
Name exists and is not a Key (such as for instances of LogicalDevice),
the same information can be present in both the Name and ElementName properties.
|
EnabledDefault
|
An enumerated value indicating an administrator's default
or startup configuration for the Enabled State of an element.
Possible values are:
- 2 = Enabled
- 3 = Disabled
- 5 = Not Applicable
- 6 = Enabled but Offline
- 7 = No Default
- 9 = Quiesce
- .. = DMTF Reserved
- 32768..65535 = Vendor Reserved
By default, the element is
Enabled (value = 2).
|
EnabledState
|
An integer enumeration that indicates the enabled and disabled
states of an element. It can also indicate the transitions between
these requested states.
Possible values are:
- 0 = Unknown
- 1 = Other
- 2 = Enabled — Indicates that the element is or could be executing
commands, will process any queued commands, and queues new requests.
- 3 = Disabled — Indicates that the element will not run commands
and drops any new requests.
- 4 = Shutting Down — Indicates that the element is in the process
of going to a Disabled state.
- 5 = Not Applicable — Indicates that the element does not support
being enabled or disabled.
- 6 = Enabled but Offline — Indicates that the element may be completing
commands, and drops any new requests.
- 7 = In Test — Indicates that the element is in a test state.
- 8 = Deferred — Indicates that the element may be completing commands,
but queues any new requests.
- 9 = Quiesce — Indicates that the element is enabled but in a restricted
mode.
- 10 = Starting — Indicates that the element is in the process of
going to an Enabled state. New requests are queued.
- 11..32767 = DMTF Reserved
- 32768..65535 = Vendor Reserved
For example, shutting down (value =
4) and starting
(value =
10) are transient states between enabled and disabled.
|
RequestedState
|
An integer enumeration that indicates the last requested
or desired state for the element, irrespective of the mechanism through
which it was requested. The actual state of the element is represented
by EnabledState. This property is provided to compare the last requested
and current enabled or disabled states.
Possible values
are:
- 0 = Unknown — Indicates the last requested state for the element
is unknown.
- 2 = Enabled
- 3 = Disabled
- 4 = Shut Down
- 5 = No Change
- 6 = Offline — Indicates that the element has been requested to
transition to the Enabled but Offline EnabledState.
- 7 = Test
- 8 = Deferred
- 9 = Quiesce
- 10 = Reboot — Refers to doing a
Shut Down and then moving
to an
Enabled state.
- 11 = Reset — Indicates that the element is first
Disabled and then
Enabled.
- 12 = Not Applicable
- .. = DMTF Reserved
- 32768..65535 = Vendor Reserved
-
NOTE: When EnabledState
is set to 5 (
Not Applicable), then this property has no meaning.
Refer to the EnabledState property description for explanations of
the values in the RequestedState enumeration.
-
NOTE: The value
No Change
(5)
has been deprecated instead of indicating the last requested
state is
Unknown (0). If the last requested or desired state
is unknown, RequestedState should have the value
Unknown (0), but may have the value
No Change (5).
There
are two new values in RequestedState that build on the statuses of EnabledState. These
are
Reboot (10) and
Reset (11).
Shut Down requests
an orderly transition to the Disabled state, and may involve removing
power, to completely erase any existing state. The Disabled state
requests an immediate disabling of the element, such that it will
not execute or accept any commands or processing requests.
This property is set as the result of a method invocation (such as
Start or StopService on CIM_Service), or can be overridden and defined
as WRITEable in a subclass. The method approach is considered superior
to a WRITEable property, because it allows an explicit invocation
of the operation and the return of a result code.
If knowledge
of the last RequestedState is not supported for the EnabledLogicalElement,
the property is NULL or has the value 12
Not Applicable.
|
SystemCreationClassName
|
The CreationClassName of the scoping system.
|
SystemName
|
The System Name of the scoping system.
|
TransitioningToState
|
Indicates the target state to which the instance is transitioning.
Possible values are:
- 0 = Unknown
- 2 = Enabled
- 3 = Disabled
- 4 = Shut Down
- 5 = No Change — Indicates that no transition is in progress.
- 6 = Offline
- 7 = Test
- 8 = Defer
- 9 = Quiesce
- 10 = Reboot
- 11 = Reset
- 12 = Not Applicable — Indicates that the implementation does not
support representing ongoing transitions.
A value other than
5 or
12 identifies the state
to which the element is in the process of transitioning.
|