Caption
|
The Caption property is a short textual description (one-
line string) of the object.
|
CPUStatus
|
The CPUStatus property that indicates the current status
of the Processor.
Possible values are:
- 0 = Unknown
- 1 = CPU Enabled
- 2 = CPU Disabled by User
- 3 = CPU Disabled By BIOS (POST Error)
- 4 = CPU Is Idle
- 7 = Other
For example, the Processor may be disabled by the user (value
=
2), or disabled due to a POST error (value =
3). Information
in this property can be obtained from SMBIOS, the Type 4 structure,
and the Status attribute.
|
CreationClassName
|
Indicates the name of the class or the subclass used in
the creation of an instance. When used with the other key properties
of this class, this property allows all instances of this class and
its subclasses to be uniquely identified.
|
CurrentClockSpeed
|
The current speed (in MHz) of this Processor.
|
Description
|
Provides a textual description of the object.
|
DeviceID
|
An address or other identifying information used to uniquely
name the LogicalDevice.
|
ElementName
|
A user-friendly name for the object. This property allows
each instance to define a user-friendly name in addition to its key
properties, identity data, and description information.
-
NOTE: The Name property of
ManagedSystemElement is also defined as a user-friendly name. But,
it is often subclassed to be a Key. It is not reasonable that the
same property can convey both identity and a user-friendly name, without
inconsistencies. Where Name exists and is not a Key (such as for instances
of LogicalDevice), the same information can be present in both the
Name and ElementName properties.
|
EnabledDefault
|
An enumerated value indicating an administrator's default
or startup configuration for the Enabled State of an element.
Possible values are:
- 2 = Enabled
- 3 = Disabled
- 5 = Not Applicable
- 6 = Enabled but Offline
- 7 = No Default
- 9 = Quiesce
- .. = DMTF Reserved
- 32768..65535 = Vendor Reserved
By default, the element is
Enabled (value = 2).
|
EnabledState
|
An integer enumeration that indicates the enabled and disabled
states of an element. It can also indicate the transitions between
these requested states.
Possible values are:
- 0 = Unknown
- 1 = Other
- 2 = Enabled — Indicates that the element is or could be executing
commands, will process any queued commands, and queues new requests.
- 3 = Disabled — Indicates that the element will not execute commands
and will drop any new requests.
- 4 = Shutting Down — Indicates that the element is in the process
of going to a Disabled state.
- 5 = Not Applicable — Indicates the element does not support being
enabled or disabled.
- 6 = Enabled but Offline — Indicates that the element may be completing
commands, and will drop any new requests.
- 7 = In Test — Indicates that the element is in a test state.
- 8 = Deferred — Indicates that the element may be completing commands,
but will queue any new requests.
- 9 = Quiesce — Indicates that the element is enabled but in a restricted
mode.
- 10 = Starting — Indicates that the element is in the process of
going to an Enabled state. New requests are queued.
- 11..32767 = DMTF Reserved
- 32768..65535 = Vendor Reserved
For example, shutting down (value =
4) and starting
(value =
10) are transient states between enabled and disabled.
|
ExternalBusClockSpeed
|
The speed (in MHz) of the external bus interface (also
known as the front side bus).
|
Family
|
The Processor family type.
Possible values are:
- 1 = Other
- 2 = Unknown
- 3 = 8086
- 4 = 80286
- 5 = 80386
- 6 = 80486
- 7 = 8087
- 8 = 80287
- 9 = 80387
- 10 = 80487
- 11 = Pentium(R) brand
- 12 = Pentium(R) Pro
- 13 = Pentium(R) II
- 14 = Pentium(R) processor with MMX(TM) technology
- 15 = Celeron(TM)
- 16 = Pentium(R) II Xeon(TM)
- 17 = Pentium(R) III
- 18 = M1 Family
- 19 = M2 Family
- 20 = Intel(R) Celeron(R) M processor
- 21 = Intel(R) Pentium(R) 4 HT processor
- 24 = K5 Family
- 25 = K6 Family
- 26 = K6-2
- 27 = K6-3
- 28 = AMD Athlon(TM) Processor Family
- 29 = AMD(R) Duron(TM) Processor
- 30 = AMD29000 Family
- 31 = K6-2+
- 32 = Power PC Family
- 33 = Power PC 601
- 34 = Power PC 603
- 35 = Power PC 603+
- 36 = Power PC 604
- 37 = Power PC 620
- 38 = Power PC X704
- 39 = Power PC 750
- 40 = Intel(R) Core(TM) Duo processor
- 41 = Intel(R) Core(TM) Duo mobile processor
- 42 = Intel(R) Core(TM) Solo mobile processor
- 43 = Intel(R) Atom(TM) processor
- 48 = Alpha Family
- 49 = Alpha 21064
- 50 = Alpha 21066
- 51 = Alpha 21164
- 52 = Alpha 21164PC
- 53 = Alpha 21164a
- 54 = Alpha 21264
- 55 = Alpha 21364
- 56 = AMD Turion(TM) II Ultra Dual-Core Mobile M Processor Family
- 57 = AMD Turion(TM) II Dual-Core Mobile M Processor Family
- 58 = AMD Athlon(TM) II Dual-Core Mobile M Processor Family
- 59 = AMD Opteron(TM) 6100 Series Processor
- 60 = AMD Opteron(TM) 4100 Series Processor
- 64 = MIPS Family
- 65 = MIPS R4000
- 66 = MIPS R4200
- 67 = MIPS R4400
- 68 = MIPS R4600
- 69 = MIPS R10000
- 80 = SPARC Family
- 81 = SuperSPARC
- 82 = microSPARC II
- 83 = microSPARC IIep
- 84 = UltraSPARC
- 85 = UltraSPARC II
- 86 = UltraSPARC IIi
- 87 = UltraSPARC III
- 88 = UltraSPARC IIIi
- 96 = 68040
- 97 = 68xxx Family
- 98 = 68000
- 99 = 68010
- 100 = 68020
- 101 = 68030
- 112 = Hobbit Family
- 120 = Crusoe(TM) TM5000 Family
- 121 = Crusoe(TM) TM3000 Family
- 122 = Efficeon(TM) TM8000 Family
- 128 = Weitek
- 130 = Itanium(TM) Processor
- 131 = AMD Athlon(TM) 64 Processor Family
- 132 = AMD Opteron(TM) Processor Family
- 133 = AMD Sempron(TM) Processor Family
- 134 = AMD Turion(TM) 64 Mobile Technology
- 135 = Dual-Core AMD Opteron(TM) Processor Family
- 136 = AMD Athlon(TM) 64 X2 Dual-Core Processor Family
- 137 = AMD Turion(TM) 64 X2 Mobile Technology
- 138 = Quad-Core AMD Opteron(TM) Processor Family
- 139 = Third-Generation AMD Opteron(TM) Processor Family
- 140 = AMD Phenom(TM) FX Quad-Core Processor Family
- 141 = AMD Phenom(TM) X4 Quad-Core Processor Family
- 142 = AMD Phenom(TM) X2 Dual-Core Processor Family
- 143 = AMD Athlon(TM) X2 Dual-Core Processor Family
- 144 = PA-RISC Family
- 145 = PA-RISC 8500
- 146 = PA-RISC 8000
- 147 = PA-RISC 7300LC
- 148 = PA-RISC 7200
- 149 = PA-RISC 7100LC
- 150 = PA-RISC 7100
- 160 = V30 Family
- 161 = Quad-Core Intel(R) Xeon(R) processor 3200 Series
- 162 = Dual-Core Intel(R) Xeon(R) processor 3000 Series
- 163 = Quad-Core Intel(R) Xeon(R) processor 5300 Series
- 164 = Dual-Core Intel(R) Xeon(R) processor 5100 Series
- 165 = Dual-Core Intel(R) Xeon(R) processor 5000 Series
- 166 = Dual-Core Intel(R) Xeon(R) processor LV
- 167 = Dual-Core Intel(R) Xeon(R) processor ULV
- 168 = Dual-Core Intel(R) Xeon(R) processor 7100 Series
- 169 = Quad-Core Intel(R) Xeon(R) processor 5400 Series
- 170 = Quad-Core Intel(R) Xeon(R) processor
- 171 = Dual-Core Intel(R) Xeon(R) processor 5200 Series
- 172 = Dual-Core Intel(R) Xeon(R) processor 7200 Series
- 173 = Quad-Core Intel(R) Xeon(R) processor 7300 Series
- 174 = Quad-Core Intel(R) Xeon(R) processor 7400 Series
- 175 = Multi-Core Intel(R) Xeon(R) processor 7400 Series
- 176 = Pentium(R) III Xeon(TM)
- 177 = Pentium(R) III Processor with Intel(R) SpeedStep(TM) Technology
- 178 = Pentium(R) 4
- 179 = Intel(R) Xeon(TM)
- 180 = AS400 Family
- 181 = Intel(R) Xeon(TM) processor MP
- 182 = AMD Athlon(TM) XP Family
- 183 = AMD Athlon(TM) MP Family
- 184 = Intel(R) Itanium(R) 2
- 185 = Intel(R) Pentium(R) M processor
- 186 = Intel(R) Celeron(R) D processor
- 187 = Intel(R) Pentium(R) D processor
- 188 = Intel(R) Pentium(R) Processor Extreme Edition
- 189 = Intel(R) Core(TM) Solo Processor
- 190 = Intel(R) Core(TM)
- 191 = Intel(R) Core(TM)2 Duo Processor
- 192 = Intel(R) Core(TM)2 Solo processor
- 193 = Intel(R) Core(TM)2 Extreme processor
- 194 = Intel(R) Core(TM)2 Quad processor
- 195 = Intel(R) Core(TM)2 Extreme mobile processor
- 196 = Intel(R) Core(TM)2 Duo mobile processor
- 197 = Intel(R) Core(TM)2 Solo mobile processor
- 198 = Intel(R) Core(TM) i7 processor
- 199 = Dual-Core Intel(R) Celeron(R) Processor
- 200 = S/390 and zSeries Family
- 201 = ESA/390 G4
- 202 = ESA/390 G5
- 203 = ESA/390 G6
- 204 = z/Architectur base
- 205 = Intel(R) Core(TM) i5 processor
- 206 = Intel(R) Core(TM) i3 processor
- 210 = VIA C7(TM)-M Processor Family
- 211 = VIA C7(TM)-D Processor Family
- 212 = VIA C7(TM) Processor Family
- 213 = VIA Eden(TM) Processor Family
- 214 = Multi-Core Intel(R) Xeon(R) processor
- 215 = Dual-Core Intel(R) Xeon(R) processor 3xxx Series
- 216 = Quad-Core Intel(R) Xeon(R) processor 3xxx Series
- 217 = VIA Nano(TM) Processor Family
- 218 = Dual-Core Intel(R) Xeon(R) processor 5xxx Series
- 219 = Quad-Core Intel(R) Xeon(R) processor 5xxx Series
- 221 = Dual-Core Intel(R) Xeon(R) processor 7xxx Series
- 222 = Quad-Core Intel(R) Xeon(R) processor 7xxx Series
- 223 = Multi-Core Intel(R) Xeon(R) processor 7xxx Series
- 224 = Multi-Core Intel(R) Xeon(R) processor 3400 Series
- 230 = Embedded AMD Opteron(TM) Quad-Core Processor Family
- 231 = AMD Phenom(TM) Triple-Core Processor Family
- 232 = AMD Turion(TM) Ultra Dual-Core Mobile Processor Family
- 233 = AMD Turion(TM) Dual-Core Mobile Processor Family
- 234 = AMD Athlon(TM) Dual-Core Processor Family
- 235 = AMD Sempron(TM) SI Processor Family
- 236 = AMD Phenom(TM) II Processor Family
- 237 = AMD Athlon(TM) II Processor Family
- 238 = Six-Core AMD Opteron(TM) Processor Family
- 239 = AMD Sempron(TM) M Processor Family
- 250 = i860
- 251 = i960
- 254 = Reserved (SMBIOS Extension)
- 255 = Reserved (Un-initialized Flash Content - Lo)
- 260 = SH-3
- 261 = SH-4
- 280 = ARM
- 281 = StrongARM
- 300 = 6x86
- 301 = MediaGX
- 302 = MII
- 320 = WinChip
- 350 = DSP
- 500 = Video Processor
- 65534 = Reserved (For Future Special Purpose Assignment)
- 65535 = Reserved (Un-initialized Flash Content - Hi)
For example, values include
Pentium(R) processor with MMX(TM)
technology
(value =
14) and
68040 (value = 96).
|
HealthState
|
Indicates the current health of the element. This attribute
expresses the health of this element but not necessarily that of its
subcomponents.
DMTF has reserved the unused portion of the
continuum for additional HealthStates in the future.
Possible
values are:
- 0 = Unknown — The implementation cannot report on HealthState
at this time.
- 5 = OK — The element is fully functional and is operating within
normal operational parameters and without error.
- 10 = Degraded/Warning — The element is in working order and all
functionality is provided. However, the element is not working to
the best of its abilities. For example, the element may not be operating
at optimal performance or it may be reporting recoverable errors.
- 15 = Minor failure — All functionality is available but some may
be degraded.
- 20 = Major failure — The element is failing. It is possible that
some or all of the functionality of this component is degraded or
not working.
- 25 = Critical failure — The element is non-functional and recovery
may not be possible.
- 30 = Non-recoverable error — The element has completely failed,
and recovery is not possible. All functionality provided by this element
has been lost.
- .. = DMTF Reserved
|
MaxClockSpeed
|
The maximum speed (in MHz) of this Processor.
|
NumberOfEnabledCores
|
Number of processor cores enabled for processor.
|
OperationalStatus
|
Indicates the current statuses of the element. Various operational
statuses are defined. Many of the enumeration's values are self-explanatory.
However, a few are not and are described here in more detail.
Possible values are:
- 0 = Unknown
- 1 = Other
- 2 = OK
- 3 = Degraded
- 4 = Stressed — Indicates that the element is functioning, but
needs attention. Examples of
Stressed states are overload,
overheated, and so on.
- 5 = Predictive Failure — Indicates that an element is functioning
nominally but predicting a failure in the near future.
- 6 = Error
- 7 = Non-Recoverable Error
- 8 = Starting
- 9 = Stopping
- 10 = Stopped — Implies a clean and orderly stop.
- 11 = In Service — Describes an element being configured, maintained,
cleaned, or otherwise administered.
- 12 = No Contact — Indicates that the monitoring system has knowledge
of this element, but has never been able to establish communications
with it.
- 13 = Lost Communication — Indicates that the ManagedSystem Element
is known to exist and has been contacted successfully in the past,
but is currently unreachable.
- 14 = Aborted — Implies an abrupt stop where the state and configuration
of the element may need to be updated.
- 15 = Dormant — Indicates that the element is inactive or quiesced.
- 16 = Supporting Entity in Error — Indicates that this element
may be
OK but that another element, on which it is dependent,
is in error. An example is a network service or endpoint that cannot
function due to lower-layer networking problems.
- 17 = Completed — Indicates that the element has completed its
operation. This value should be combined with either OK, Error, or
Degraded so that a client can tell if the complete operation Completed
with OK (passed), Completed with Error (failed), or Completed with
Degraded (the operation finished, but it did not complete OK or did
not report an error).
- 18 = Power Mode — Indicates that the element has additional power
model information contained in the Associated PowerManagementService
association.
- .. = DMTF Reserved
- 0x8000.. = Vendor Reserved
OperationalStatus replaces the Status property on ManagedSystemElement
to provide a consistent approach to enumerations, to address implementation
needs for an array property, and to provide a migration path from
today's environment to the future. This change was not made earlier
because it required the deprecated qualifier. Due to the widespread
use of the existing Status property in management applications, it
is strongly recommended that providers or instrumentation provide
both the Status and OperationalStatus properties. Further, the first
value of OperationalStatus should contain the primary status for the
element. When instrumented, Status (because it is single-valued) should
also provide the primary status of the element.
|
PrimaryStatus
|
Provides a high level status value, intended to align with
Red-Yellow-Green type representation of status. It should be used
in conjunction with DetailedStatus to provide high level and detailed
health status of the ManagedElement and its subcomponents.
Possible values are:
- 0 = Unknown — Indicates the implementation is in general capable
of returning this property, but is unable to do so at this time.
- 1 = OK — Indicates the ManagedElement is functioning normally.
- 2 = Degraded — Indicates the ManagedElement is functioning below
normal.
- 3 = Error - Indicates the ManagedElement is in an Error condition.
- .. = DMTF Reserved
- 0x8000.. = Vendor Reserved
|
RequestedState
|
An integer enumeration that indicates the last requested
or desired state for the element, irrespective of the mechanism through
which it was requested. The actual state of the element is represented
by EnabledState. This property is provided to compare the last requested
and current enabled or disabled states.
Possible values
are:
- 0 = Unknown
- 2 = Enabled
- 3 = Disabled
- 4 = Shut Down
- 5 = No Change
- 6 = Offline
- 7 = Test
- 8 = Deferred
- 9 = Quiesce
- 10 = Reboot
- 11 = Reset
- 12 = Not Applicable
- .. = DMTF Reserved
- 32768..65535 = Vendor Reserved
-
NOTE: When EnabledState
is set to 5 (
Not Applicable), then this property has no meaning.
Refer to the EnabledState property description for explanations of
the values in the RequestedState enumeration.
Unknown (0)
indicates the last requested state for the element is unknown.
-
NOTE: The value
No Change (5) has been deprecated instead of indicating the last
requested state is
Unknown (0). If the last requested or desired
state is unknown, RequestedState should have the value
Unknown
(0)
, but may have the value
No Change (5).
Offline (6) indicates that the element has been requested to transition to the
Enabled but Offline EnabledState. There are two new values in
RequestedState that build on the statuses of EnabledState. These are
Reboot (10) and
Reset (11). Reboot refers to doing a
Shut Down and then moving to an
Enabled state. Reset indicates
that the element is first
Disabled and then
Enabled.
Shut Down requests an orderly transition to the Disabled
state, and may involve removing power, to completely erase any existing
state. The Disabled state requests an immediate disabling of the element,
such that it will not execute or accept any commands or processing
requests.
This property is set as the result of a method
invocation (such as Start or StopService on CIM_Service), or can be
overridden and defined as WRITEable in a subclass. The method approach
is considered superior to a WRITEable property, because it allows
an explicit invocation of the operation and the return of a result
code.
If knowledge of the last RequestedState is not supported
for the EnabledLogicalElement, the property is NULL or has the value
12
Not Applicable.
|
Stepping
|
Stepping is a free-form string that indicates the revision
level of the Processor within the Processor.Family.
|
SystemCreationClassName
|
The CreationClassName of the scoping system.
|
SystemName
|
The System Name of the scoping system.
|
TransitioningToState
|
Indicates the target state to which the instance is transitioning.
Possible values are:
- 0 = Unknown
- 2 = Enabled
- 3 = Disabled
- 4 = Shut Down
- 5 = No Change — Indicates that no transition is in progress.
- 6 = Offline
- 7 = Test
- 8 = Defer
- 9 = Quiesce
- 10 = Reboot
- 11 = Reset
- 12 = Not Applicable — Indicates the implementation does not support
representing ongoing transitions.
A value other than
5 or
12 identifies the state
to which the element is in the process of transitioning.
|
UniqueID
|
A global unique identifier for the processor. This identifier
can be unique only within a processor family.
|
UpgradeMethod
|
CPU socket information that includes data on how the processor
can be upgraded (if upgrades are supported). This property is an integer
enumeration.
Possible values are:
- 1 = Other
- 2 = Unknown
- 3 = Daughter Board
- 4 = ZIF Socket
- 5 = Replacement/Piggy Back
- 6 = None
- 7 = LIF Socket
- 8 = Slot 1
- 9 = Slot 2
- 10 = 370 Pin Socket
- 11 = Slot A
- 12 = Slot M
- 13 = Socket 423
- 14 = Socket A (Socket 462)
- 15 = Socket 478
- 16 = Socket 754
- 17 = Socket 940
- 18 = Socket 939
- 19 = Socket mPGA604
- 20 = Socket LGA771
- 21 = Socket LGA775
- 22 = Socket S1
- 23 = Socket AM2
- 24 = Socket F (1207)
- 25 = Socket LGA1366
- 26 = Socket G34
- 27 = Socket AM3
- 28 = Socket C32
- 29 = Socket LGA1156
- 30 = Socket LGA1567
- 31 = Socket PGA988A
- 32 = Socket BGA1288
- 33 = rPGA988B
- 34 = BGA1023
- 35 = BGA1224
- 36 = LGA1155
- 37 = LGA1356
- 38 = LGA2011
- 39 = Socket FS1
- 40 = Socket FS2
- 41 = Socket FM1
- 42 = Socket FM2
- 43 = Socket LGA2011–3
- 44 = Socket LGA1356–3
- 45 = Socket LGA1150
- 46 = Socket BGA1168
|