- Notes, cautions, and warnings
- Set up your computer
- Chassis
- System specifications
- BIOS setup
- Software
- Getting help
Option | Description |
---|---|
AC Recovery | Determines how the system responds when AC power
is re-applied after a power loss. You can set the AC Recovery to:
|
Enable Intel Speed Shift Technology | Allows you to enable or disable Intel Speed Shift Technology support. The option Enable Intel Speed Shift Technology is set by default. |
Auto On Time | Sets time to automatically turn on the computer.
Time is kept in standard 12-hour format (hour:minutes:seconds).
Change the startup time by typing the values in the time and AM/PM
fields. NOTE This
feature does not work if you turn off your computer using the switch
on a power strip or surge protector or if Auto Power is set to
disabled. |
Deep Sleep Control | Allows you to define the controls when Deep Sleep
is enabled.
|
USB Wake Support | Allows you to enable the USB devices to wake the computer from standby mode. The option "Enable USB Wake Support" is selected by default |
Wake on LAN/WWAN | This option allows the computer to power up from
the off state when triggered by a special LAN signal. This feature
only works when the computer is connected to AC power supply.
|
Block Sleep | Allows you to block entering to sleep (S3 state) in OS environment. This option is disabled by default. |