Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In

Dell EMC Configuration Guide for the S3100 Series 9.14.2.4

PDF

Showing IPv6 Routes

To view the global IPv6 routing information, use the following command.

Show IPv6 routing information for the specified route type.
EXEC mode
show ipv6 route [vrf vrf-name] type
The following keywords are available:

  • To display information about a network, enter ipv6 address (X:X:X:X::X).

  • To display information about a host, enter hostname.

  • To display information about all IPv6 routes (including non-active routes), enter all.

  • To display information about all connected IPv6 routes, enter connected.

  • To display information about brief summary of all IPv6 routes, enter summary.

  • To display information about Border Gateway Protocol (BGP) routes, enter bgp.

  • To display information about ISO IS-IS routes, enter isis.

  • To display information about Open Shortest Path First (OSPF) routes, enter ospf.

  • To display information about Routing Information Protocol (RIP), enter rip.

  • To display information about static IPv6 routes, enter static.

  • To display information about an IPv6 Prefix lists, enter list and the prefix-list name.

Examples of the show ipv6 route Commands

The following example shows the show ipv6 route summary command.

DellEMC#show ipv6 route summary

Route Source Active Routes Non-active Routes
connected 5 0
static 0 0
Total 5 0

The following example shows the show ipv6 route command.

DellEMC#show ipv6 route
Codes: C - connected, L - local, S - static, R - RIP,
       B - BGP, IN - internal BGP, EX - external BGP,LO - Locally Originated,
       O - OSPF, IA - OSPF inter area, N1 - OSPF NSSA external type 1,
       N2 - OSPF NSSA external type 2, E1 - OSPF external type 1,
       E2 - OSPF external type 2, i - IS-IS, L1 - IS-IS level-1,
       L2 - IS-IS level-2, IA - IS-IS inter area, * - candidate default,
Gateway of last resort is not set

   Destination  Dist/Metric,        Gateway, Last Change
-----------------------------------------------------
C  600::/64 [0/0]
      Direct, Gi 1/24, 00:34:42
C  601::/64 [0/0]
      Direct, Gi 1/24, 00:34:18
C  912::/64 [0/0]
      Direct, Lo 2, 00:02:33
O  IA 999::1/128 [110/2]
      via fe80::201:e8ff:fe8b:3166, Te 1/24, 00:01:30
L  fe80::/10 [0/0]
      Direct, Nu 0, 00:34:42
DellEMC#

The following example shows the show ipv6 route static command.

DellEMC#show ipv6 route static
Destination Dist/Metric, Gateway, Last Change
-----------------------------------------------------
  S         8888:9999:5555:6666:1111:2222::/96 [1/0]
               via         2222:2222:3333:3333::1, Gi 9/1, 00:03:16
  S         9999:9999:9999:9999::/64 [1/0]
               via 8888:9999:5555:6666:1111:2222:3333:4444, 00:03:16

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\