Example Configuration and Verification
The following example contains static routes for both default and nondefault VRFs.
Dell#show run | grep bfd bfd enable ipv6 route bfd prefix-list p6_le ipv6 route bfd vrf vrf1 ipv6 route bfd vrf vrf2 ipv6 route bfd vrf vrf1 prefix-list p6_le
The following example shows that sessions are created for static routes for the default VRF.
Dell(conf)#do show bfd neighbors * - Active session role Ad Dn - Admin Down B - BGP C - CLI I - ISIS O - OSPF O3 - OSPFv3 R - Static Route (RTM) M - MPLS V - VRRP VT - Vxlan Tunnel LocalAddr RemoteAddr Interface State Rx-int Tx-int Mult Clients * 11::1 11::2 Gi 1/1 Up 200 200 3 R * 21::1 21::2 Vl 100 Up 200 200 3 R * 31::1 31::2 Vl 101 Up 200 200 3 R
The following example shows that sessions are created for static routes for the nondefault VRFs.
Dell(conf)#do show bfd vrf vrf2 neighbors * - Active session role Ad Dn - Admin Down B - BGP C - CLI I - ISIS O - OSPF O3 - OSPFv3 R - Static Route (RTM) M - MPLS V - VRRP VT - Vxlan Tunnel LocalAddr RemoteAddr Interface State Rx-int Tx-int Mult VRF Clients * 13::1 13::2 Gi 1/1 Up 200 200 3 2 R * 23::1 23::2 Vl 300 Up 200 200 3 2 R * 33::1 33::2 Vl 301 Up 200 200 3 2 R