Dell EMC Configuration Guide for the S3100 Series 9.14.2.4

Display the Power Details

You can view the power allocated to a port and the power consumed by a port by using the following commands.

To view the power allocated, use the show power inline {stack-unit unit number | interface interface SLOT/PORT} command.

Example:

Dell#show power inline stack-unit 1
Global inline power Threshold :           10
Power Reserved for inline Power:          95W
Total Inline Power Consumed:              0W
Remaining inline power Available:         95W
Power Management Mode:       Class
Interface   Inline Power   Inline Power    Class   Device  PoE Port    LLDP
            Max / Alloc     Consumed                Type   Priority   Support
             (Watts)        (Watts)
---------   ------------   ------------   -------  ------  --------   ------
Gi 1/1           0.00 /0.00         0.00      NO_DEVICE      -     high      
Dell#

To view the power consumption details, use the show power detail {stack-unit unit number} command.

Example:

Dell#show power detail stack-unit 1
Unit    Total      System   Redundancy Inline     Inline    Inline    Inline   Inline
        Power      Power    Power      Power      Power     Power     Power    Power
        Available  Consumed Consumed   Threshold  Available Allocated Consumed Remaining
        (Watts)    (Watts)  (Watts)    (%)        (Watts)   (Watts)   (Watts)  (Watts)
----------------------------------------------------------------------------------------
1       1100       150      0          10          95       0         0         95
Dell#