Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In

Edge Gateway 3001 Installation and Operation Manual

PDF

Windows 10 IOT Enterprise LTSB 2016 basic functions

BIOS update

For more information about updating the BIOS, see Accessing and updating the BIOS .

Watchdog Timer

The Watchdog Timer for Windows 10 IoT Enterprise LTSB 2016 is controlled through the BIOS setting.
The Watchdog Timer is enabled and disabled under the BIOS setting Watchdog Timer.

Cloud LED

  • NOTE: To utilize the Cloud LED, download the necessary tools and drivers from www.dell.com/support.
One unique feature of the Edge Gateway 3000 Series is the Cloud LED. Cloud LED enables you to visually inspect the operational status of the Edge Gateway by looking at the display light on the left panel of the Edge Gateway.

To enable this feature, you must expose and program a GPIO register on the Edge Gateway.

Follow these steps to control the Cloud LED on the Edge Gateway:
  1. Download the Cloud LED utility from www.dell.com/support.
  2. Extract the following files:
    1. DCSTL64.dll
    2. DCSTL64.sys
    3. DCSTL64.inf
    4. DCSTL64.cat
    5. CloudLED.exe
    • NOTE: These files must be in the same directory.
  3. Run the CloudLED.exe from Command Prompt or PowerShell with administrative rights. Run the following commands:
    • CloudLED.exe ON
    • CloudLED.exe OFF

TPM support

Windows 10 IoT Enterprise LTSB 2016 supports TPM 2.0. For more information about TPM resources, see technet.microsoft.com/en-us/library/cc749022.

System shutdown and restart

Click Start > Power , and then click Restart or Shutdown to restart or shutdown the Edge Gateway, respectively.

LAN and WLAN network configuration

In the Search box, type Settings and open the Settings window. Select Network & Internet to configure the network.

Bluetooth configuration

In the Search box, type Settings and open the Settings window. Select Devices, and then select Bluetooth from the menu on the left panel to configure the network.

WWAN (5815) network configuration

Follow these steps after installing the micro-SIM card:
  1. In the Search box, type Settings and open the Settings window.
  2. Select Network & Internet.
  3. Locate the WWAN connection in the Wi-Fi section and select the entry to connect and disconnect from the WWAN adapter.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\