Zu den Hauptinhalten
Abmelden

Willkommen bei Dell

Mein Konto
  • Bestellungen schnell und einfach aufgeben
  • Bestellungen anzeigen und den Versandstatus verfolgen
  • Profitieren Sie von exklusiven Prämien und Rabatten für Mitglieder
  • Erstellen Sie eine Liste Ihrer Produkte, auf die Sie jederzeit zugreifen können.
  • Verwalten Sie mit der Unternehmensverwaltung Ihre Dell EMC Seiten, Produkte und produktspezifischen Kontakte.
Anmelden Konto erstellen Premier-Anmeldung Anmeldung beim Partnerprogramm
Kontakt

Ihr Warenkorb bei Dell.com

Dell Wyse ThinOS Version 9.0 Operating System Release Notes

PDF

ThinOS 9.0 feature matrix

This section outlines the ThinOS local settings that are delivered in the ThinOS 9.0 release.
Table 1. ThinOS 9.0 feature matrix—Local settingsThinOS 9.0 feature matrix—Local settings
ThinOS functional area Description Supported Additional information
System Management Firmware and application packages Enables you to install the ThinOS firmware and application packages.
  • Firmware signature
  • Operating system firmware update
  • Packages update
  • Packages compatibility
  • BIOS update
  • MIX update
Limited support BIOS update is not supported.
Dell BIOS Enables you to configure the Dell BIOS settings through Wyse Management Suite and Admin Policy Tool. No Not available
Admin Policy Tool Enables IT administrators to manage device configurations. Limited support For more information about the supported features, see the Admin Policy Tool feature matrix.
Wyse Device Agent (WDA) settings Enables you to set the Wyse Management Suite information. Yes Not available
Wyse Management Suite Enables you to manage ThinOS 9.0-based thin clients using Wyse Management Suite v2.0. Yes Not available
System components First Boot Wizard Enables you to configure the thin client settings before you enter the ThinOS system desktop. You can configure the following options using the First Boot Wizard application:
  • Select a language.
  • Select a keyboard layout.
  • Select a time zone.
  • Connect to a wired or wireless network.
  • Import the Wyse Management Suite configurations or import configurations from a USB drive.
  • Select a Broker agent.
Yes Not available
Printer Enables you to configure the printer that is connected to the thin client.
  • Connect a USB printer to the thin client.
  • Connect a Serial printer to the thin client.
  • Connect a Parallel printer to the thin client.
  • Set the printer as COM, LPT, LPD, or SMB printer.
Yes If you want to use a mapped printer in the session, use a printer that supports the PostScript printing language.
Lock terminal Enables you to lock the thin client using any of the following methods:
  • Unplug a signed-on smart card from the thin client.
  • Use the Lock Terminal option from the shortcut menu.
  • Use the Lock Terminal option from the shutdown dialog box.
  • Use a screensaver.
Yes Not available
Sign off and shut down Enables you to sign out from the current account or shut down the system voluntarily.
Use the shutdown dialog box to perform the following tasks:
  • Sign out from your current user account.
  • Reboot the system.
  • Shut down the system.
  • Enter into sleep mode.
  • Lock the terminal.
  • Reset the system to factory default settings.
Yes Not available
Classic desktop mode Enables you to use the classic desktop with a horizontal taskbar at the bottom of the screen. The following are the desktop components:
  • Shortcut Menu
  • Left Menu
  • System Tray
  • Start Menu
  • Connection Manager
Yes Not available
Network setup—General settings Enables you to configure the following network settings:
  • Default gateway for a dual network connection.
  • Domain Name System (DNS) and Windows Internet Name Service (WINS).
  • Transmission Control Protocol (TCP) timeout.
Limited support WINS is not supported.
Network setup—DHCP settings Enables you to configure the Dynamic Host Configuration Protocol (DHCP) options to get the DHCP Scope settings from the server.
  • DHCP Option ID for Citrix Server—181
  • DHCP Option ID for Domain List—182
  • DHCP Option ID for Group Registration Key—199
  • DHCP Option ID for Wyse Management Suite server—165
  • DHCP Option ID for Message Queuing Telemetry Transport (MQTT) server—166
  • DHCP Option ID for CA validation—167
  • DHCP Option ID for negative input
  • DHCP Vendor ID
  • DHCP UserClass ID
Supported Not available
Network setup—Ethernet settings Enables you to configure the following Ethernet connection settings:
  • Ethernet port selection for dual Network Interface Controller (NIC).
  • Ethernet speed selection.
  • IPv4 and IPv6 properties.
  • IEEE802.1x authentication.
Limited support
  • Dual IPv6 is not supported.
  • SFP is limited support. The thin client cannot fetch the IP address, mostly when you are using a dual network connection.
  • The EEE802.1x wired authentication may fail after one minute if using EAP-LEAP.
Network setup—WLAN settings Enables you to configure the following wireless connection settings:
  • Wireless scan
  • Wireless profile (Security/Authentication)
  • Add or remove a wireless profile.
  • Disable wireless
  • Wireless IP configuration
Yes Not available
Network setup—Proxy settings Enables you to configure the proxy network settings. HTTP, HTTPS, and SOCKS5 protocols are supported. Yes Not available
Virtual Private Network (VPN)—OpenConnect Enables you to configure a virtual private network. Yes Not available
Wireless connection
  • Marvell Wireless Chipset 8897
  • Intel Wireless Chipset 9560
  • IEEE 802.11 a/b/g/n/ac
  • Dual Band 2.4G and 5G
  • Available Bandwidths and Channels in Chipset Spec
  • Securities and authentications—WPA/WPA2, TLS/PEAP/LEAP/FAST/MSCHAPV2/GTC
  • Wireless Scanning functionality
  • Wireless connectivity—WLAN information, WiFi performance, roaming, Dual-network, Bluetooth, compatibility with routers, APs, and controllers.
Limited support
  • WEP is not supported.
  • 802.11r/k is supported on Wyse 5070, Wyse 5470, Wyse 5470 All-in-One clients with Intel Wireless Chipset 9560.
Bluetooth Enables you to connect to Bluetooth v3.0 and v4.0 devices. Limited support Bluetooth mouse and keyboard with Bluetooth v3.0 are supported.
Audio, USB audio, and DisplayPort audio Enables you to use USB audio and DP audio. Yes
DP audio limitations on the Wyse 3040 Thin Client are as follows:
  • Audio latency is 1.5 seconds.
  • DP audio is disabled by default.
  • Works only with screen resolution less than or equal to 1920 x 1080.
  • DP audio is supported only on DisplayPort 1.
System Preference Enables you to configure the following system settings:
  • Screen saver
  • Locale
  • Terminal name
  • Time and date
  • Custom information
  • Power and Sleep
Yes Not available
Display setup Enables you to configure the following display settings:
  • Display resolution
  • Display rotation
  • Mirror mode
  • Span mode
  • Main screen alignment
  • Identify screens
  • Single screen and multiple screens configuration
Yes Not available
On-Screen Display (OSD)—Applicable only for Wyse 5470 All-in-One Thin Client Enables you to configure the following OSD settings:
  • Adjust brightness
  • Turn off and turn on the screen.
  • Turn off the screen and wake up the screen using a USB mouse or a USB keyboard.
Yes Not available
Peripheral settings Enables you to configure the following peripherals settings:
  • Mouse settings
  • Keyboard settings
  • Audio settings
  • Serial settings
  • Camera settings
  • Bluetooth settings
Yes Touch screen that needs calibration is not supported.
Touch screen—Applicable only for Wyse 5470 Thin Client Enables you to use the touch screen gestures on the Wyse 5470 Thin Client. Yes Not available
Touchpad—Applicable only for Wyse 5470 Thin Client Enables you to use the touchpad gestures on the Wyse 5470 Thin Client. Yes Not available
Function keys Enables you to use the Function key combinations in both local and Citrix sessions. Limited support Fn key combination does not work in Citrix sessions.
Close lid function—Applicable only for Wyse 5470 Thin Client Enables you to turn off or turn on the displays when the lid is closed. Yes Not available
Power management—Applicable only for Wyse 5470 Thin Client Enables you to use the following power-saving options—with or without AC power supply:
  • Adjust the screen brightness.
  • Automatically shut down or enter sleep mode
Yes Not available
Battery indicator—Applicable only for Wyse 5470 Thin Client Enables you to use the battery indicator to check the battery status of the Wyse 5470 Thin Client. Yes Not available
Reset to factory default settings Enables you to reset the thin client to factory default settings. Yes Not available
System Tools—Certificates and packages Enables you to configure the following options:
  • Import a certificate.
  • Delete a certificate.
  • Simple Certificate Enrollment Protocol (SCEP)—Request a certificate and automatically enroll using a password.
  • Admin Policy Tool to configure SCEP
  • View packages list
  • Delete one or more packages.
Yes Not available
Troubleshooting Enables you to use the following options to troubleshoot your thin client:
  • Performance Monitor
  • Export system settings
  • Export screenshots
  • Export system logs
  • Network capture
  • Wireless capture
  • Capture USB packets.
  • Network ping and Trace route
  • Telnet
Limited support Extract and restore CMOS are not supported.
Session properties Enables you to configure the session settings using Connect Manager or session menu. Yes Not available
USB devices Enables you to use the following options:
  • Connect to USB 2.0 and USB 3.0 ports.
  • USB mapping
  • USB redirection
Yes Not available
Dell Docking Station WD19 Enables you to access all peripherals—mouse, keyboard, stereo speakers, external hard drive, and large-screen displays—without having to plug each one into the thin client. Limited support
  • Audio jack does not work.
  • Wake on LAN/USB using the Dell Docking Station WD19 is not supported.
Secure Digital (SD) card—Applicable only for Wyse 5470 Thin Client Enables you to import and export files. Yes Not available
System Security Trusted Platform Module (TPM) Enables you to enable disk encryption with TPM. Yes Not available
Smart card Enables you to use a smart card to authenticate the user. Limited support When you launch a disconnected Citrix Windows 2012/2016 session, the session stops responding.
Authentication settings Enables you to configure the following authentication settings:
  • OneSign configuration using IP
  • OneSign configuration using FQDN
  • HealthCast configuration
Limited support HealthCast is not supported.
Secure Boot Option to enable Secure Boot on the thin client. No Not available
ThinOS VDI configuration Broker agent settings Enables you to configure the Citrix Broker agent settings. Yes Not available
General settings Enables you to configure the following general options:
  • Sign-off automatically
  • Shut down the system automatically.
  • Restart the system automatically.
  • Set default login credentials
Yes Not available
Global Connection Settings Enables you to configure the settings common to all sessions and all ICA sessions in the Global Connection Settings window. Yes Not available
PNA button menu Enables you to use the following options from the PNA button menu:
  • Refresh
  • Reconnect
  • Log off
  • Disconnect
  • Manage security questions (Enable SSPR).
Yes Not available
Sign-on window Enables you to use the login options available on the sign-on window. You can use a smart card, Imprivata, and other two-factor authentication methods to log in to the Citrix session. Yes Not available

Diesen Inhalt bewerten

Präzise
Nützlich
Leicht verständlich
War dieser Artikel hilfreich?
0/3000 characters
  Bitte geben Sie eine Bewertung ab (1 bis 5 Sterne).
  Bitte geben Sie eine Bewertung ab (1 bis 5 Sterne).
  Bitte geben Sie eine Bewertung ab (1 bis 5 Sterne).
  Bitte geben Sie an, ob der Artikel hilfreich war.
  Die folgenden Sonderzeichen dürfen in Kommentaren nicht verwendet werden: <>()\