Dell OptiPlex 7450 All-In-One Owner's Manual

Removing camera module

1. Follow the procedure in Before working inside your computer.
2. Remove the:
   1. stand
   2. optical drive
   3. back cover
   4. hard drive
   5. system board shield
   6. cable cover
   7. memory module
   8. coin cell battery
   9. SSD card
   10. WLAN card
   11. heat sink
   12. processor
   13. system fan
   14. OSD board
   15. speaker
   16. VESA mount bracket
   17. system board
   18. chassis frame
3. To remove camera module:
   1. Remove the two M3.5x5 screws that secure the camera module [1].
   2. Flip the camera module. [2].
   3. Disconnect the camera cable to release the camera module [3].