Zu den Hauptinhalten
  • Bestellungen schnell und einfach aufgeben
  • Bestellungen anzeigen und den Versandstatus verfolgen
  • Profitieren Sie von exklusiven Prämien und Rabatten für Mitglieder
  • Erstellen Sie eine Liste Ihrer Produkte, auf die Sie jederzeit zugreifen können.
  • Verwalten Sie mit der Unternehmensverwaltung Ihre Dell EMC Seiten, Produkte und produktspezifischen Kontakte.

Dell OptiPlex 3020–Small Form Factor Owner's Manual

Removing the Heatsink Assembly

  1. Follow the procedures in Before Working Inside Your Computer .
  2. Remove the cover
  3. Using both hands, push away the two release handles while lifting the fan shroud upward and off the computer. Figure displaying how to remove the heat—sink cover
  4. Perform the following steps as shown in the illustration:
    1. Press the fan cable [1].
    2. Disconnect the fan cable from the system board [2].
    3. Loosen the captive screws, lift the heat sink assembly and then remove it from the computer.
    figure displaying how to loosen the captive screws and lift the heat sink assembly upwards

Diesen Inhalt bewerten

Präzise
Nützlich
Leicht verständlich
War dieser Artikel hilfreich?
0/3000 characters
  Bitte geben Sie eine Bewertung ab (1 bis 5 Sterne).
  Bitte geben Sie eine Bewertung ab (1 bis 5 Sterne).
  Bitte geben Sie eine Bewertung ab (1 bis 5 Sterne).
  Bitte geben Sie an, ob der Artikel hilfreich war.
  Die folgenden Sonderzeichen dürfen in Kommentaren nicht verwendet werden: <>()\