Die Daten werden geladen. Bitte haben Sie einen Moment Geduld.
Set failure threshold for automatic start of SupportAssist OS Recovery
About this task
By default, your computer starts SupportAssist OS Recovery automatically if it fails to boot to the operating system on two consecutive attempts. If necessary, you can configure the failure threshold for the automatic start of SupportAssist OS Recovery.
Steps
Turn on or restart your computer.
Press F2 to enter
System Setup.
NOTE:If you wait too long and the operating system logo is displayed, wait until you see the Windows desktop, restart your computer, and try again.
In the left pane, expand
SupportAssist System Resolution, and then select
Auto OS Recovery Threshold.
In the right pane, select one of the following:
OFF—disables the automatic start of SupportAssist System Resolution and SupportAssist OS Recovery
1—automatically starts SupportAssist OS Recovery after a single failure
2—automatically starts SupportAssist OS Recovery after two failures
3—automatically starts SupportAssist OS Recovery after three or more failures
Press
F10 to save the changes and exit.
Results
The failure threshold for automatic start of SupportAssist OS Recovery is set. Based on the option you selected, SupportAssist OS Recovery starts automatically if your computer fails to boot to the operating system. If you selected
OFF, SupportAssist OS Recovery does not start automatically. In such cases, you can start it manually, see
Manually start SupportAssist OS Recovery.
Keine Daten für dieses Thema verfügbar
Bitte geben Sie eine Bewertung ab (1 bis 5 Sterne).
Bitte geben Sie eine Bewertung ab (1 bis 5 Sterne).
Bitte geben Sie eine Bewertung ab (1 bis 5 Sterne).
Bitte geben Sie an, ob der Artikel hilfreich war.
Die folgenden Sonderzeichen dürfen in Kommentaren nicht verwendet werden: <>()\