Enhanced Pre-Boot
System Assessment — ePSA diagnostics
The ePSA diagnostics
(also known as system diagnostics) performs a complete check of your
hardware. The ePSA is embedded with the BIOS and is launched by the
BIOS internally. The embedded system diagnostics provides a set of
options for particular devices or device groups allowing you to:
The ePSA diagnostics can be initiated by the FN+PWR buttons while powering on the computer.
Run tests automatically or in an interactive mode
Repeat tests
Display or save test results
Run thorough tests to introduce additional test options
to provide extra information about the failed device(s)
View status messages that inform you if tests are
completed successfully
View error messages that inform you of problems encountered
during testing
NOTE: : Some tests for
specific devices require user interaction. Always ensure that you
are present at the computer terminal when the diagnostic tests are
performed.
Der er ingen tilgængelige data i forbindelse med emnet
Angiv vurderinger (1-5 stjerner).
Angiv vurderinger (1-5 stjerner).
Angiv vurderinger (1-5 stjerner).
Angiv, om artiklen var nyttig eller ej.
Kommentarer må ikke indeholde følgende specialtegn: <>()\