The computer POST (Power On Self Test) ensures that
it meets the basic computer requirements and the hardware is working
appropriately before the boot process begins. If the computer passes
the POST, the computer continues to start in a normal mode. However,
if the computer fails the POST, the computer emits a series of LED
codes during the start-up. The system LED is integrated on the Power
button.
The following table shows different light patterns
and what they indicate.
Table 1. Power LED summary The following table provides the power led summary and what they indicate.
Amber LED state
White LED state
System state
Notes
Off
Off
S5
Off
Blinking
S3, no PWRGD_PS
Previous State
Previous State
S3, no PWRGD_PS
This entry provides for the possibility of a delay from SLP_S3# active to PWRGD_PS inactive.
Blinking
Off
S0, no PWRGD_PS
Steady
Off
S0, no PWRGD_PS, Code fetch = 0
Off
Steady
S0, no PWRGD_PS, Code fetch = 1
This indicates that the host BIOS has started to execute and the LED register is now writable.
Table 2. Amber LED blinking failuresThe following table provides the amber led blinking and what they indicate.
Amber LED state
White LED state
System state
Notes
2
1
Bad MBD
Bad MBD - Rows A, G, H, and J from table 12.4 of SIO Spec - Pre-Post indicators [40]
2
2
Bad MB, PSU or cabling
Bad MBD, PSU or PSU cabling - Rows B, C and D of table 12.4 SIO spec [40]
2
3
Bad MBD, DIMMS, or CPU
Bad MBD, DIMMS or CPU - Rows F and K from table 12.4 of SIO spec [40]
2
4
Bad coin cell
Bad coin cell - Row M of table 12.4 in SIO spec [40]
Table 3. States Under Host BIOS Control The following table provides the different light
patterns and what they indicate.
Amber LED state
White LED state
System state
Notes
2
5
BIOS state 1
BIOS Post code (Old LED pattern 0001) Corrupt BIOS.
2
6
BIOS state 2
BIOS Post code (Old LED pattern 0010) CPU config or CPU failure.
2
7
BIOS state 3
BIOS Post code (Old LED pattern 0011) MEM config in process. Appropriate mem modules detected but failure has occurred.
3
1
BIOS state 4
BIOS Post code (Old LED pattern 0100) Combine PCI device config or failure with video sub sytem config or failure. BIOS to eliminate 0101 video code.
3
2
BIOS state 5
BIOS Post code (Old LED pattern 0110) Combine storage and USB config or failure. BIOS to eliminate 0111 USB code.
3
3
BIOS state 6
BIOS Post code (Old LED pattern 1000) MEM config, no memory detected.
3
4
BIOS state 7
BIOS Post code (Old LED pattern 1001) Fatal Motherboard error.
3
5
BIOS state 8
BIOS Post code (Old LED pattern 1010) Mem config, modules incompatible or invalid config.
3
6
BIOS state 9
BIOS Post code (Old LED pattern 1011) combine "Other pre-video activity and resource configuration codes. BIOS to eliminate 1100 code.
3
7
BIOS state 10
BIOS Post code (Old LED pattern 1110) Other pre-post activity, routine subsequent to video init.
Der er ingen tilgængelige data i forbindelse med emnet
Angiv vurderinger (1-5 stjerner).
Angiv vurderinger (1-5 stjerner).
Angiv vurderinger (1-5 stjerner).
Angiv, om artiklen var nyttig eller ej.
Kommentarer må ikke indeholde følgende specialtegn: <>()\