Integrated Dell Remote Access Controller 9 User's Guide

Configuring IPMI over LAN using RACADM

1. Enable IPMI over LAN.

   racadm set iDRAC.IPMILan.Enable 1

   NOTE This setting determines the IPMI commands that are executed using IPMI over LAN interface. For more information, see the IPMI 2.0 specifications at intel.com.
2. Update the IPMI channel privileges.

   racadm set iDRAC.IPMILan.PrivLimit <level>

   Parameter	Privilege level
   <level> = 2	User
   <level> = 3	Operator
   <level> = 4	Administrator

3. Set the IPMI LAN channel encryption key ,if required.

   racadm set iDRAC.IPMILan.EncryptionKey <key>

   Parameter	Description
   <key>	20-character encryption key in a valid hexadecimal format.