- Notes, cautions, and warnings
- Release summary
- Compatibility
- New and enhanced features
- Fixes
- Deprecated features
- Important notes
- Known issues — To be fixed in future releases
- iDRAC DUP update fails in Linux operating systems when secure boot is enabled
- System Setup iDRAC Power Configuration Menu prompts to save changes unexpectedly
- iDRAC and iSM Communication failure
- SupportAssist collection failing
- Cooling fans displaying N/A status
- CMC firmware update fails from iDRAC
- Joining iDRAC to Group Manager fails on VLAN network
- CPU information not available in hardware inventory
- Intel Coldstream NVMe drives appearing as cryptographic erase capable
- Missing Qlogic NIC Partitions in iDRAC GUI
- SupportAssist collection job creation fails
- System configuration profile NIC job completes with errors
- iDRAC Firmware Update page not responding
- IDSDM controller listed in iDRAC without an IDSDM installed
- Webserver restarts after remote presence port number is updated
- Getting an error SWC0018 during OS installation
- WSMan query with space between attributes fails
- Attributes for CNA cards not displayed through Redfish or RACADM interface
- Rollback firmware Version is not displayed for NVDIMMs
- Get method not displaying certificates after all certificates are deleted
- iDRAC dashboard page in IE displays an expanded progress bar
- Unable to create a recurring job after same recurring job was completed
- Unable to create virtual disk through Redfish
- SCP Import Job completes with error due to HddSeq error
- iDRAC LC Log shows reset cause as ‘watchdog’
- Delayed response when iDRAC’s network settings are reconfigured
- Integrated/Embedded NIC displaying status as Unknown
- No errors when the selected component and the selected device firmware do not match
- PCIe SSD Backplane 2 is displayed as unknown
- Firmware update operation not scheduled through WSMan
- Access to serial interface fails.
- Remote File Share (RFS) does not stay connected after downgrading iDRAC
- LC log created after going to Virtual media page in iDRAC GUI
- Firmware update for a replaced PSU failing
- Device description and type not displayed
- Get method on UefiTargetBootSourceOverride attribute shows null value
- Sluggishness in Virtual Console
- Blank boot capture file generated
- Unable to export factory shipped inventory
- NIC or FC device slot listed in hardware inventory even when disabled in BIOS
- Get operation not displaying model or serial number for PCIe devices
- iDRAC DUP update fails on SLES when secure boot is enabled
- Boot mode error during OS deployment
- Repetitive PR7 messages related to PSU in LC logs after a system erase operation
- After a warm reboot, LC logs display Disk Inserted
- Limitations
- Updating iDRAC firmware
- Lifecycle Controller Remote Services — client tools
- Resources and support
- Contacting Dell EMC
Velkommen
Dell-websteder
Dell-websteder
Velkommen hos Dell
Min konto
- Afgiv ordrer hurtigt og nemt
- Se ordrer og spor status for din forsendelse
- Opret og få adgang til en liste med dine produkter
- Administrer dine Dell EMC-websteder, -produkter og -kontaktpersoner på produktniveau ved hjælp af Company Administration (Virksomhedsadministration).
iDRAC9 Version 4.10.10.10 Release Notes
System Setup iDRAC Power Configuration Menu prompts to save changes unexpectedly
- Description
-
While exiting System Setup iDRAC Power Configuration menu, a warning is displayed to save or discard the changes.
- Workaround
-
Select Yes to save changes when exiting iDRAC Settings Menu.
- Systems affected
- DSS 8440 and PowerEdge R940xa, with four Power Supply Units.
- Tracking number
- 163753
Angiv vurderinger (1-5 stjerner).
Angiv vurderinger (1-5 stjerner).
Angiv vurderinger (1-5 stjerner).
Angiv, om artiklen var nyttig eller ej.
Kommentarer må ikke indeholde følgende specialtegn: <>()\