Přeskočit na hlavní obsah

Latitude 5491 Service Manual

Removing LED board

  1. Follow the procedure in Before working inside your computer.
  2. Remove the .
    1. base cover
    2. battery
    3. hard drive
    4. SSD card
    5. SSD frame
    6. WLAN card
    7. WWAN card (optional)
    8. chassis frame
  3. To remove the LED board:
    1. Lift the latch and remove the LED cable connected to the connector on the LED board [1]
    2. Remove the (M2.0x2.0) screw that secures the LED board to the system [2].
    3. Lift the LED board from the connector [3].
      Image shows removal of LED board

Hodnoťte tento obsah

Přesné
Užitečné
Snadno srozumitelné
Byl tento článek užitečný?
0/3000 characters
  Zadejte hodnocení (1 až 5 hvězdiček).
  Zadejte hodnocení (1 až 5 hvězdiček).
  Zadejte hodnocení (1 až 5 hvězdiček).
  Vyberte, zda vám článek pomohl či nikoli.
  Komentáře nesmí obsahovat tyto speciální znaky: <>() \