The Real Time Clock (RTC) reset function allows you to recover your Dell system from
No POST/No Boot/No Power situations. To initiate the RTC reset on the system make sure system is in a power-off
state and is connected to power source . Press and hold the power button for 25 seconds
and then release the power button.
Go to how to reset real time clock.
NOTE: If AC power is disconnected from the system during the process or the power button is held longer than 40 seconds, the RTC reset process is aborted.
The RTC reset will reset the BIOS to Defaults, un-provision Intel vPro and reset the system date and time. The following items are unaffected by the RTC reset:
Service Tag
Asset Tag
Ownership Tag
Admin Password
System Password
HDD Password
TPM on and Active
Key Databases
System Logs
The following items may or may not reset based on your custom BIOS setting selections:
The Boot List
Enable Legacy OROMs
Secure Boot Enable
Allow BIOS Downgrade
Pro téma nejsou k dispozici data
Zadejte hodnocení (1 až 5 hvězdiček).
Zadejte hodnocení (1 až 5 hvězdiček).
Zadejte hodnocení (1 až 5 hvězdiček).
Vyberte, zda vám článek pomohl či nikoli.
Komentáře nesmí obsahovat tyto speciální znaky: <>() \