Dell Command | PowerShell Provider Version 2.4 Reference Guide

PDF

VirtualizationSupport

Table 1. VirtualizationSupportVirtualizationSupport
Attribute	Description
AmdVtEnable	This field specifies whether the Virtual Machine Monitor (VMM) utilizes the additional hardware capabilities provided by AMD-V Technology. The following are the possible values: Enabled Disabled
AmdViEnable	This field specifies whether the Virtual Machine Monitor (VMM) utilizes the additional hardware capabilities provided by AMD-Vi Technology. The following are the possible values: Enabled Disabled
IntelVMDTechnology	Enables or disables the Intel Volume Management Device (VMD) technology. Selecting Auto Enables VMD for any PCIe SSD connected to PCIe root ports. If the Auto option is not selected, then it disables VMD for all ports. SSD works only as native NVMe device. The following are the possible values: Auto Disabled
VmdPcieSlot	Enables or disables the Intel Volume Management Device (VMD) technology Pcie slot. Selecting Auto Enables VMD for any PCIe SSD connected to PCIe root ports. If the Auto option is not selected, then it disables VMD for all ports. SSD works only as native NVMe device. The following are the possible values: Auto Disabled
TrustExecution	Determines whether a Measured Virtual Machine Monitor (MVVM) can utilize the additional hardware capabilities provided by the Intel Trusted Execution Technology. NOTE: TPM has to be enabled and activated. Also, Virtualization Technology and VT for Direct I/O must be enabled to use this feature. The following are the possible values: Enabled Disabled
Virtualization	Enables or disables the VT technology in applicable CPUs. Trusted execution required for Virtualization technology to be enabled. The following are the possible values: Enabled Disabled
VtForDirectIo	Determines whether a Virtual Machine Monitor (VMM) can utilize the additional hardware capabilities provided by Intel Virtualization Technology for Direct IO. The following are the possible values: Enabled Disabled
PcieLinkSpeed	Configures PCIe LinkSpeed. The following are the possible values: auto—PCIe link speed is configured based on the maximum speed supported by both upstream and downstream devices. gen1—The PCIe link speed is configured in Gen1. gen2—The maximum PCIe link speed that allows to be configured is limited to Gen2.