Dell Command | PowerShell Provider Version 2.4 Reference Guide

PDF

PreEnabled

Table 1. PreEnabled There are certain pre-enabled features in DCPP, for these features the help texts may not be available. But, you can perform get and set operations.
Attribute	Description
AmdSmartShift	Sets the AmdSmartShift. The following are the possible values: Enabled—On a discrete GPU system, AMD SmartShift allows the system’s CPU and discrete GPU to share the power limits. This allows the potential performance that increases within the systems power or thermal limitation, Disabled—AmdSmartShift feature disabled. .
BiosConnectActivation	Configures the state of the available BiosConnect boot paths. The following are the possible values: Deactivate—BIOS setup options are not available and all BiosConnect boot paths are disabled. FullActivation—BIOS Setup options are enabled and all BiosConnect boot paths are enabled. LaunchpadActivationOnly—BIOS setup options are enabled and only launchpad code path is enabled.
DashSupport	Enables and disables the support for Desktop and Mobile Architecture for System Hardware (DASH) management through Platform Level Data Model (PLDM) exchanges. The following are the possible values: Enabled Disabled
DisGpuExtDisplay	Enables or disables the platform external displays. The following are the possible values: Enabled—Allows discrete Graphics Processing Unit (dGPU) to enable the platform external displays such as HDMI, NB DP and Type-C, etc. with the purpose of enabling discrete graphic features such as Eyefinity, Mosaic, 10bit DP displays, etc.. NOTE: Embedded Display Port (eDP) will be enabled by Integrated Graphics Processing Unit (iGPU). Disabled—The normal hybrid graphics mode is enabled. NOTE: This feature is used in hybrid graphics mode only.
ExpansionBay 1	Enables or disables Expansion Bay 1. The following are the possible values: Enabled Disabled
ExpansionBay 2	Enables or disables Expansion Bay 2. The following are the possible values: Enabled Disabled
ExpansionBay 3	Enables or disables Expansion Bay 3. The following are the possible values: Enabled Disabled
FaultTolerantMemLogClear	Enables or disables the Fault Tolerant Memory Log Clear option. The following are the possible values: Enabled—System clears fault tolerant memory log during the next boot. Disabled—Fault Tolerant Memory Log Clear option will be disabled, and no action will be taken during the next boot. NOTE: Fault Tolerant Memory Log Clear option will be reset to disabled state after log gets cleared.
GpsWwan	Enables or disables GPS WWAN Radio. The following are the possible values:\ Enabled Disabled
GraphicSpecMode	Enables or disables the modes. The following are the possible values: Enabled—Allows discrete Graphics Processing Unit (dGPU) to enable the platform external displays such as HDMI, NB DP and Type-C, etc. with the purpose of enabling modes graphic features. NOTE: Embedded Display Port (eDP) will be enabled by Integrated Graphics Processing Unit (iGPU). Disabled—The normal hybrid graphics mode is enabled. NOTE: This feature is used in hybrid graphics mode only.
MemPerMonitor	Enables or disables the memory performance monitor feature. The following are the possible values:\ Enabled Disabled
PcieBusAllocation	This feature controls the PCIe bus resources allocation among the PCIe SLOTs. The following are the possible values: Default OptimizeforThunderbolt Option1 Option2 Option3
RecoveryTool	Enables or disables the Dell recovery tool. The following are the possible values: Enabled—Enables the Dell recovery tool. Disabled—Disables the Dell recovery tool.
ReportLogoType	Reports the type of splash screen logo (Dell or custom) that is passed from BIOS to user. The following are the possible values: 0 and 1 NOTE: You cannot enable or disable this feature using Dell Command \| PowerShell Provider.
RuggedDeskDockNicPxe	Enables or disables the support for PXE Boot from Rugged Desk Dock NIC device. The following are the possible values:] Enabled Disabled
ServiceOSClear	Deletes the service OS non-volatile region. The following are the possible values: Enabled—Deletes the service OS non-volatile region and changes the token status to Disabled. Disabled—Does not delete the service OS non-volatile region.
TelemetryAccessLvl	This feature controls the type of telemetry for data support. The following are the possible values: Disabled—No telemetry Basic—Flash and Diags only Enhanced—Flash, Diags, and Boot Event Full—All telemetry
UsbWakeS4En	Enables or disables the USB wake from s4 power state of the system. The following are the possible values: Enabled—Enables the USB wake from s4 power state of the system. Disabled—Disables the USB wake from s4 power state of the system.